bc32a487fb
Upload files to "stl"
2025-12-28 23:46:25 -06:00
43530fd4de
Update README.md
2025-12-28 23:33:34 -06:00
fd30013eec
Update calibration/readme.md
2025-12-28 23:26:57 -06:00
2eb70b9e90
Update calibration/readme.md
2025-12-28 23:24:16 -06:00
53da826555
Upload files to "calibration"
2025-12-28 23:20:02 -06:00
1f56b23035
Delete calibration/1%22 pipe ring test.scad
2025-12-28 23:19:41 -06:00
df4b2fae7c
Update calibration/readme.md
2025-12-28 23:19:32 -06:00
c2c270b87c
Add calibration/readme.md
2025-12-28 23:19:14 -06:00
363a8bc553
Upload files to "calibration"
2025-12-28 23:19:04 -06:00
e8a7c07405
Upload files to "calibration"
2025-12-28 23:18:50 -06:00
952ff59b75
Update README.md
2025-12-28 23:17:33 -06:00
e2d8ca72d9
Add README.md
2025-12-28 23:17:15 -06:00
ea2d35ba32
Upload files to "/"
...
The "Notch" System: * 1 Notch = The smallest offset (tightest).
3 Notches = Your current "winners" (0.15 for 1" and 0.20 for 1/2").
6 Notches = The largest offset (loosest).
Documentation Entry: "Tolerance tests should be performed whenever switching filament brands or PVC manufacturers. Use the 10mm ring array; the '3-notch' ring represents the gold-standard fit for the current Centauri Carbon calibration."
2025-12-28 23:17:05 -06:00
08cc653614
Delete calibration/test rings v2.stl
2025-12-28 23:15:58 -06:00
c46e9f3485
Delete calibration/test rings v2.scad
2025-12-28 23:15:53 -06:00
4a119d5845
Delete calibration/test rings v1.stl
2025-12-28 23:15:37 -06:00
16e75e3574
Delete calibration/mini rings test v1.stl
2025-12-28 23:15:28 -06:00
f4ea94f03a
Upload files to "calibration"
2025-12-28 23:11:33 -06:00
8aa03cea5a
Delete calibration/1:2 test rings v1.scad
2025-12-28 23:11:13 -06:00
c0a96c61a5
Delete calibration/1:2 test rings v1.stl
2025-12-28 23:11:02 -06:00
1b9477fe16
Upload files to "calibration"
2025-12-28 23:10:12 -06:00
ede73a2f66
Upload files to "calibration"
2025-12-28 23:08:58 -06:00
